• products-banner

Product

PFAS-Free And Fluorine-Free Polymer Processing Aids(PPA) SILIMER 9300

SILIMER-9300 is a silicone additive containing polar functional groups, used in PE, PP and other plastic and rubber products, can significantly improve processing and release, reduce die drool and improve melt rupture problems, so that the product reduction is better. At the same time, SILIMER 9300 has a special structure, good compatibility with the matrix resin, no precipitation, no impact on the appearance of the product and surface treatment.


Product Detail

Product Tags

Sample service

Description

SILIMER-9300 is a silicone additive containing polar functional groups, used in PE, PP and other plastic and rubber products, can significantly improve processing and release, reduce die drool and improve melt rupture problems, so that the product reduction is better. At the same time, SILIMER 9300 has a special structure, good compatibility with the matrix resin, no precipitation, no impact on the appearance of the product and surface treatment.

Product Specifications

Grade

SILIMER 9300

Appearance

Off-white pellet
Active content

100%

Melting point

50~70

 Volatile(%)

 ≤0.5

Application areas

Preparation of polyolefin films; Polyolefin wire extrusion; Polyolefin pipe extrusion; Fluorinated PPA application related fields.

Typical benefits

Product surface performance: improve scratch resistance and wear resistance, reduce the surface friction coefficient, improve the surface smoothness;
Polymer processing performance: effectively reduce the torque and current during processing, reduce energy consumption, and make the product have good demolding and lubricity, improve processing efficiency.

How to use

SILIMER 9300 can be premixed with masterbatch, powder, etc., can also be added in proportion to produce masterbatch. SILIMER 9300 has good high temperature resistance properties and can be used as an additive for polyolefin and engineering plastics. The recommended dosage is 0.1%~5%. The amount used depends on the composition of the polymer formula.

Transportation & Storage

This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture. 

Package & Shelf life

The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg. Original characteristics remain intact for 24 months from the production date if kept in recommend storage. 


  • Previous:
  • Next:

  • FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES

    Sample type

    $0

    • 50+

      grades Silicone Masterbatch

    • 10+

      grades Silicone Powder

    • 10+

      grades Anti-scratch Masterbatch

    • 10+

      grades Anti-abrasion Masterbatch

    • 10+

      grades Si-TPV

    • 8+

      grades Silicone Wax

    Write your message here and send it to us