Product
FC 5364 Slip & Anti-Blocking Masterbatch for PE blown film and cast film
Description
SILIKE FC 5364 is a slip and anti-blocking masterbatch. It uses polyethylene (PE)as the carrier and contains organic slip agents and inorganic anti-blocking components.
Product Specifications
|
Grade |
FC 5364 |
|
Appearance |
white or off-white pellet |
|
Resin base |
PE |
|
Melt index (g/10min) (190℃,2.16kg) |
0.5~5 |
|
Volatile((%) |
≤0 .5 |
| Bulk density（kg/cm3) | 450~550 |
Benefits
1. When used in polyethylene films, FC 5364 slip and anti-blocking additive can significantly improve film opening and slip performance, prevent film sticking during production, greatly reduce the dynamic and static coefficient of friction on the film surface, and has no effect on transparency.
2. It has no adverse effect on subsequent processing, such as printing, lamination, and heat sealing.
3. The slip agent component contains silicone chain segments, giving the product good processing lubricity, which can improve processing efficiency and enhance processing performance during production.
Typical applications
FC 5364 Slip and Anti-Blocking Masterbatch is especially suitable for polyethylene (PE) blown film and cast film applications.
How to use
For optimal slip and anti-blocking performance, it is recommended to add FC 5364 into the surface layer of the film structure. Recommended dosage: 1%–6%.
Processing Note: Due to the strong processing lubricity of the silicone-containing formulation, the product may initially help clean residual material from equipment dead zones during start-up, which can temporarily increase gel or crystal point appearance in film production. This phenomenon typically stabilizes during continuous processing without affecting final film performance.
Transportation & Storage
This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50°C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.
Package & Shelf life
The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg. Original characteristics remain intact for 12 months from the production date if kept in recommend storage.
FAQ
Frequently Asked Questions About FC 5364 PE Film Slip & Anti-Blocking Masterbatch
Q1: What is FC 5364 PE slip and anti-blocking masterbatch used for?
A: FC 5364 is used in polyethylene film production to improve slip performance, reduce film blocking, and support stable processing in blown film and cast film applications.
Q2: How to reduce friction and blocking in PE films?
A:FC 5364 helps lower the coefficient of friction (COF) and reduce film-to-film adhesion, improving film opening and roll separation performance.
Q3: Is FC 5364 suitable for transparent PE films?
A: Yes. FC 5364 is designed to improve slip and anti-blocking performance while maintaining film transparency and appearance quality.
Q4: Can FC 5364 affect printing, lamination, or heat sealing?
A: FC 5364 is suitable for PE packaging films requiring downstream converting processes such as printing, lamination, and heat sealing.
Q5: What is the recommended dosage of FC 5364?
A: The recommended addition level is typically 1%–6%, depending on film structure, processing conditions, and required slip performance.
Q6: Why do crystal points increase during initial processing?
A: Due to its strong processing lubricity, FC 5364 may initially help clean residual material from equipment dead zones, which can temporarily increase crystal points during start-up.
Q7: Is FC 5364 suitable for high-speed blown film production?
A: Yes. FC 5364 is designed for high-speed polyethylene blown film and cast film production requiring stable slip and anti-blocking performance.
Q8: What applications are suitable for FC 5364?
A: It is suitable for transparent packaging films, food packaging films, consumer goods packaging films, and industrial polyethylene film applications.
Chengdu SILIKE Technology Co., Ltd. is a leading Chinese manufacturer specializing in silicone-based plastic additives and thermoplastic silicone elastomers, with over 20 years of expertise in silicone–polymer integration. SILIKE offers a comprehensive portfolio, including silicone processing aids, silicone masterbatches, silicone powders, anti-scratch and anti-wear additives, PFAS-free and fluorine-free processing solutions, non-migrating slip and anti-blocking additives, dispersants, matt-effect masterbatches, wet slip-resistant and wear-resistant additives, as well as Si-TPV dynamic vulcanized thermoplastic silicone elastomers that combine silicone-like comfort with thermoplastic processability and recyclability.
Serving industries such as automotive, wire & cable, films, footwear, WPCs, electronics, consumer goods, and sustainable biodegradable materials, SILIKE helps manufacturers improve processing efficiency, surface quality, durability, and tactile performance while meeting increasingly strict environmental and regulatory requirements. Guided by the philosophy “Innovating Silicone, Empowering New Values,” SILIKE is a trusted innovation partner enabling safer, high-performance, and future-ready polymer solutions.
For more details, please contact Ms. Amy Wang at amy.wang@silike.cn.
FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES
Sample type
$0
- 50+
grades Silicone Masterbatch
- 10+
grades Silicone Powder
- 10+
grades Anti-scratch Masterbatch
- 10+
grades Anti-abrasion Masterbatch
- 10+
grades Si-TPV
- 8+
grades Silicone Wax
-
Phone
-
E-mail
-
Whatsapp
Whatsapp
-
Top
