China Wholesale Silicone wax For Polyolefin Processing Suppliers – Anti-blocking Silicone Wax SILIMER 5062 in Film – Silike

Product Detail

Product Tags

Sample service

Feedback (2)

Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Thermoplastic Silicone Vulcanizate, Silicone Lubricant, Silicone Fluids, Our products are strictly inspected before exporting , So we gain a good reputation all over the world. We looking forward to cooperation with you in the future.

China Wholesale Silicone wax For Polyolefin Processing Suppliers – Anti-blocking Silicone Wax SILIMER 5062 in Film – Silike Detail:

Description

SILIMER 5062 is long chain alkyl-modified siloxane masterbatch containing polar functional groups. It is mainly used in PE, PP and other polyolefin films, can significantly improve anti-blocking & smoothness of the film, and the lubrication during processing, can greatly reduce the film surface dynamic and static friction coefficient, make the film surface more smooth. At the same time, SILIMER 5062 has a special structure with good compatibility with the matrix resin, no precipitation, no effect on the transparency of film.

Product Specifications

Grade	SILIMER 5062
Appearance	white or light yellow pellet
Resin Base	LDPE
Melt index (190℃、2.16KG )	5~25
Dosage % (w/w)	0.5~5

Benefits

1) Improve surface quality including no precipitation ,no effect on transparency ,no effect on the surface and printing of film, lower Coefficient of friction,better surface smoothness;

2) Improve processing properties including better flow ability,faster throughput ;

Typical applications:

Good anti-blocking & smoothness, lower Coefficient of friction, and better processing properties in PE,PP film;

Typical COF test data ( Pure PP vs PP+ 2% 5062 )

How to use

Addition levels between 0.5~5.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended .

Transportation & Storage

This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.

Shelf life

The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg . Original characteristics remain intact for 12 months from the production date if kept in recommend storage.

Marks: The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information cannot be understood as a commitment of this product. The raw materials and its composition of this product will not be introduced here because patented technology is involved.