China China Wholesale PE Wax Manufacturers – Wear Resistant Silicone Wax SILIMER 5060 In Thermoplastic – Silike Manufacture and Factory

China Wholesale PE Wax Manufacturers – Wear Resistant Silicone Wax SILIMER 5060 In Thermoplastic – Silike

Product Detail

Product Tags

Sample service

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Silicone Based Polymer, Siloxane, Silicone Additive For Paint, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.

China Wholesale PE Wax Manufacturers – Wear Resistant Silicone Wax SILIMER 5060 In Thermoplastic – Silike Detail:

Description

SILIMER 5060 is a long-chain polar functional group alkyl modified silicone additive. It is used in thermoplastic products such as PE, PP, PVC, etc. It could Obviously improves the scratch-resistant and wear-resistant surface properties of products, improves the lubricity and mold release of the material during processing process, largely decreases the Coefficient of dynamic and static friction to make the surface of products more smooth. At the same time, SILIMER 5060 has a special structure with good compatibility with the matrix resin, no precipitation, no effect on the appearance and surface treatment of products.

Fundamental Parameters

Grade	SILIMER 5060
Appearance	Milky white paste
Concentration	100%
Melt index (℃ )	70~80
Volatiles % (105℃×2h)	≤ 0.5

Application advantages

1) Improve scratch resistance and wear resistance;

2) Reduce surface friction coefficient, improve surface smoothness;

3) Make products have good mold release and lubricity, improve processing efficiency.

Typical applications

Scratch-resistant, lubricated, mold release in PE, PP, PVC, and other TPO materials; scratch-resistant, lubricated in thermoplastic elastomers such as TPE, TPU.

How to use

Addition levels between 0.3~1.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended .

Transportation & Storage

This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.

Package & Shelf life

The standard packaging is a PE plastic drum with net weight of 25kg/drum . Original characteristics remain intact for 12 months from the date of production if kept in recommended storage method.