Product

China Wholesale PE Wax Factories – Flowable Silicone Wax SILIMER 5063 Processing Ease – Silike

Send email to us

Product Detail

Product Tags

Sample service

Feedback (2)

As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Over-Molding TPE/TPU, Si TPE, Si-Tpv For Wearable Devices, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.

China Wholesale PE Wax Factories – Flowable Silicone Wax SILIMER 5063 Processing Ease – Silike Detail:

Description

SILIMER 5063 is long chain alkyl-modified siloxane masterbatch containing polar functional groups. It is mainly used in BOPP films, CPP films, pipes, pump dispensers and other products compatible with polypropylene. It can significantly improve anti-blocking & smoothness of the film, and the lubrication during processing, can greatly reduce the film surface dynamic and static friction coefficient, make the film surface more smooth. At the same time, SILIMER 5063 has a special structure with good compatibility with the matrix resin, no precipitation, no sticky, and no effect on the transparency of film.

Product Specifications

Grade	SILIMER 5063
Appearance	white or light yellow pellet
Resin base	PP
Melt index (230℃, 2.16KG) g/10min	5~25
Dosage % (w/w)	0.5~5

Benefits

(1) Improve surface quality including no precipitation, no sticky, no effect on transparency, no effect on the surface and printing of film, lower Coefficient of friction, better surface smoothness.

(2)Improve processing properties including better flow ability, faster throughput.

Typical applications

(1) BOPP,CPP, and other PP compatible plastic films

(2)Pump dispensers, cosmetic covers

(3) Plastic pipe

Typical COF test data ( Pure PP vs PP+ 4% 5063 )

捕获1
捕获2

How to use

Addition levels between 0.5~5.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended .

Transportation & Storage

This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.

Package & Shelf life

The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg . Original characteristics remain intact for 12 months from the production date if kept in recommend storage.

Marks: The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information cannot be understood as a commitment of this product. The raw materials and its composition of this product will not be introduced here because patented technology is involved.